[ Pobierz całość w formacie PDF ]
ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL
TOYOTA COROLLA VERSO 02 ’! DIESEL
’!
MAKE MOD. YEAR
X
ALARM/SIREN Position the compact alarms and the sirens on the passenger s side wheel house.
POSITION
Position the modular systems and the modules under the dashboard, on the left of
CENTRAL UNIT POSITION
the steering column.
POWER SUPPLY +30: connect to the WHITE wire located in the white connector, in the central
part of the fuse box.
-31: connect to an original ground terminal located behind the left lateral
bulkhead, driver s side.
IGNITION WIRE +15/54: connect to the WHITE/BLACK wire at the pos. nr. 5, in the 6 way black
connector, in the fuse box.
DIRECTION INDICATORS Connect to the GREEN/YELLOW wire at the position nr. 6 and to the
GREEN/BLACK wire at the position nr. 11, in the 24 way white connector, in the
fuse box.
ELECTRIC WINDOWS Positive control signal
Front window, driver s side:
cut the RED wire in the 20 way white connector, in the push-button panel on the
driver s side door.
Front window, passenger s side:
cut the YELLOW wire in the 12 way white connector, in the push-button panel on
the driver s side door.
CENTRAL DOORS LOCKING Negative control signal
Connect to the GREEN/YELLOW wire at the position nr. 3 (lock) and to the
BLUE/RED wire at the position nr. 4 (unlock) in the 12 way blue connector, behind
the driver s side sill cover.
IMMOBILISATION POINT Gasoil pump
Cut the BLACK/WHITE wire at the position nr. 4, in the 18 way white connector,
behind the passenger s side glove compartment.
STARTER +50: cut the BLACK wire at the pos. nr. 7, in the 10 way grey connector, behind
the passenger s side glove compartment.
BONNET SWITCH Install an additional switch on the headlamp support plate, driver s side.
DOORS AND BOOT SWITCH Connect to the RED/YELLOW wire with at the position nr. 17, in the 24 way white
connector, in the fuse box.
Connect to the VIOLET/WHITE wire, in the 28 way white connector, on the central
ODOMETER
behind the passenger s side glove compartment.
tocov02gbd.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
[ Pobierz całość w formacie PDF ]